Inmazeb (atoltivimab, maftivimab, and odesivimab-ebgn) is a canonical profile in the public catalog. The sections below restate label fields stored for this page.
1 INDICATIONS AND USAGE INMAZEB is indicated for the treatment of infection caused by Orthoebolavirus zairense in adult and pediatric patients, including neonates born to a mother who is RT-PCR positive for Orthoebolavirus zairense infection [see Dosage and Administration (2.2) , and Clinical Studies (14) ] . INMAZEB is a combination of Orthoebolavirus zairense glycoprotein-directed human monoclonal antibodies (atoltivimab, maftivimab, and odesivimab), indicated for the treatment of infection caused by Orthoebolavirus zairense in adult and pediatric patients, including neonates born to a mother who is RT-PCR positive for Orthoebolavirus zairense infection. ( 1 ) Limitation of Use The efficacy of INMAZEB has not been established for other species of the Orthoebolavirus and Orthomarburgvirus genera . Orthoebolavirus zairense can change over time, and factors such as emergence of resistance, or changes in viral virulence could diminish the clinical benefit of antiviral drugs. Consider available information on drug susceptibility patterns for circulating Orthoebolavirus zairense strains when deciding whether to use INMAZEB. Limitations of Use The efficacy of INMAZEB has not been established for other species of the Orthoebolavirus and Orthomarburgvirus genera. Orthoebolavirus zairense can change over time, and factors such as emergence of resistance, or changes in viral virulence could diminish the clinical benefit of antiviral drugs. Consider available information on drug susceptibility patterns for circulating Orthoebolavirus zairense strains when deciding whether to use INMAZEB.
12.1 Mechanism of Action INMAZEB is an antiviral drug combination of three recombinant human IgG1κ monoclonal antibodies (atoltivimab, maftivimab, and odesivimab) that inhibit Orthoebolavirus zairense [ see Microbiology (12.4) ].
5 WARNINGS AND PRECAUTIONS Hypersensitivity Reactions Including Infusion-Associated Events: Hypersensitivity reactions including infusion-associated events have been reported during and post-infusion with INMAZEB. These may include acute, life-threatening reactions during and after the infusion. Monitor patients and in the case of severe or life-threatening hypersensitivity reactions, discontinue the administration of INMAZEB immediately and administer appropriate emergency care. ( 5.1 ) 5.1 Hypersensitivity Reactions Including Infusion-Associated Events Hypersensitivity reactions including infusion-associated events have been reported during and post-infusion with INMAZEB. These may include acute, life-threatening reactions during and after the infusion. Monitor all patients for signs and symptoms including, but not limited to, hypotension, chills and elevation of fever, during and following INMAZEB infusion. In the case of severe or life-threatening hypersensitivity reactions, discontinue the administration of INMAZEB immediately and administer appropriate emergency care [see Adverse Reactions (6.1) ] . Infusion could not be completed in 1% of subjects who received INMAZEB due to infusion-associated adverse events. The rate of infusion of INMAZEB may be slowed or interrupted if the patient develops any signs of infusion-associated events or other adverse events [see Adverse Reactions (6.1) ] .
4 CONTRAINDICATIONS None. None. ( 4 )
Two subjects who received inmazeb (1%)
The following clinically significant adverse reactions are described elsewhere in the labeling: Hypersensitivity Reactions Including Infusion-Associated Events [see Warnings and Precautions (5.1) ]
2 DOSAGE AND ADMINISTRATION The recommended dosage of INMAZEB is 50 mg of atoltivimab, 50 mg of maftivimab, and 50 mg of odesivimab per kg diluted and administered as a single intravenous infusion. ( 2.1 ) Refer to the Full Prescribing Information for information on preparation and administration. ( 2.2 ) 2.1 Recommended Dosage INMAZEB is a combination of three human monoclonal antibodies co-formulated in a 1:1:1 ratio of atoltivimab, maftivimab, and odesivimab. INMAZEB is available as two different strength presentations, containing either 16.67 mg of each antibody per mL or 33.33 mg of each antibody per mL [see Dosage Forms and Strengths (3) ] . The recommended dosage of INMAZEB is 50 mg of atoltivimab, 50 mg of maftivimab, and 50 mg of odesivimab per kg diluted and administered as a single intravenous infusion as shown in Table 1 [see Dosage and Administration (2.2) ] . 2.2 Preparation and Administration INMAZEB must be prepared and administered under the supervision of a healthcare provider. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. INMAZEB should be clear to slightly opalescent, colorless to pale yellow solution that is free from visible particulates. Discard the vial if the solution is cloudy, discolored or contains particulate matter. Preparation for Intravenous Infusion The recommended dosage is based on 50 mg of atoltivimab, 50 mg of maftivimab, and 50 mg of odesivimab per kg. For example, a patient weighing 50 kg the recommended dosage is 2,500 mg of atoltivimab, 2,500 mg of maftivimab, and 2,500 mg of odesivimab. Determine the number of vials needed based on the calculated dose in volume (mL). – The number of vials needed depends on the INMAZEB strength used. Refer to Table 1 for the corresponding volume per kg needed to withdraw from each available strength presentation to prepare dose. – Multiple INMAZEB vials may be needed. Each vial contains 14.5 mL of INMAZEB solution, regardless of the strength presentation. For example, for a 50 kg patient, the volume of INMAZEB needed is 150 mL (11 vials) if using the 16.67 mg/16.67 mg/16.67 mg per mL solution or 75 mL (6 vials) if using the 33.33 mg/33.33 mg/33.33 mg per mL solution. Table 1: INMAZEB Dosage (Volume per kg) for Intravenous Infusion Preparation When Using the When Using the 241.7 mg of atoltivimab, 241.7 mg of maftivimab, and 241.7 mg of odesivimab per 14.5 mL 483.3 mg of atoltivimab, 483.3 mg of maftivimab, and 483.3 mg of odesivimab per 14.5 mL (16.67 mg /16.67 mg /16.67 mg per mL) Solution (33.33 mg/33.33 mg /33.33 mg per mL) Solution Withdraw 3 mL of solution per kg to prepare the dose Withdraw 1.5 mL of solution per kg to prepare the dose Do not shake the vial. Prior to intravenous infusion, INMAZEB must be further diluted in an intravenous PVC infusion bag containing either 0.9% Sodium Chloride Injection, USP, 5% Dextrose Injection, USP, or Lactated Ringer's Injection, USP. For neonates, the INMAZEB solution should be diluted in 5% Dextrose Injection, USP (see Table 2 ). The total volume of the infusion solution to be administered is based on the patient's body weight and is specified in Table 2 . Select a diluent solution infusion bag of appropriate fill volume based on the patient's body weight (see Table 2 ). Withdraw and discard from the bag a volume of diluent solution equal to the calculated dose in volume (mL) of INMAZEB. Then add the calculated volume of INMAZEB to the bag. For example: – When using the 16.67 mg/16.67 mg/16.67 mg per mL solution for a 50 kg patient, withdraw and discard 150 mL of diluent from a 500 mL infusion bag. Then add 150 mL of INMAZEB to obtain a total infusion volume of 500 mL. – When using the 33.33 mg/33.33 mg/33.33 mg per mL solution for a 50 kg patient, withdraw and discard 75 mL of diluent from a 500 mL infusion bag. Then add 75 mL of INMAZEB to obtain a total infusion volume of 500 mL. Table 2: INMAZEB Infusion Volumes and Times by Body Weight Body Weight (kg) Total Infusion Volume After Dilution (mL) The recommended infusion volume ensures the final concentration of the diluted solution is 9.5 mg/mL to 23.7 mg/mL for the 16.67 mg/16.67 mg/16.67 mg per mL solution and 9.5 mg/mL to 30 mg/mL for the 33.33 mg/33.33 mg/33.33 mg per mL solution. 5% Dextrose Injection, USP is recommended for neonates. Infusion Time 0.5 to less than 1 7 4 hours 1 to 1.9 15 2 to 3.9 25 3 hours 4 to 7 50 8 to 15 100 16 to 38 250 2 hours 39 to 79 500 80 to 149 1,000 150 and above 2,000 4 hours Mix the diluted solution by gentle inversion. Do not shake. INMAZEB does not contain preservatives. It is always recommended to administer intravenous medication immediately after preparation when possible. Store the diluted INMAZEB solution as specified in Table 3 . Do not freeze the diluted solution. Discard any unused medicinal product or waste material. Table 3: Diluted INMAZEB Solution Storage Conditions Diluent Used to Prepare Solution for Infusion Diluted INMAZEB Solution Storage Conditions 0.9% Sodium Chloride Injection, USP Store at room temperature up to 25°C (77°F) for no more than 8 hours or refrigerated at 2°C to 8°C (36°F to 46°F) for no more than 24 hours. 5% Dextrose Injection, USP Store at room temperature up to 25°C (77°F) for no more than 4 hours or refrigerated at 2°C to 8°C (36°F to 46°F) for no more than 24 hours. Lactated Ringer's Injection, USP Store at room temperature up to 25°C (77°F) for no more than 4 hours or refrigerated at 2°C to 8°C (36°F to 46°F) for no more than 4 hours. Administration INMAZEB must be administered by a healthcare provider. Allow the diluted infusion solution to come to room temperature prior to administration. INMAZEB diluted with 5% Dextrose Injection, USP can be infused at temperatures up to 35°C (95°F). When the temperature is higher than 25°C (77°F), administer the diluted INMAZEB with 5% Dextrose Injection, USP immediately after completion of dose preparation. Administer the diluted infusion solution intravenously through an intravenous line containing a sterile, in-line or add-on 0.2-micron filter. The infusion rate is based on the patient's body weight and prepared infusion volume. Select an appropriate infusion rate for the diluted infusion solution (see Table 2 ). It is important to follow the infusion time outlined in Table 2 based on the patient's weight. The rate of infusion of INMAZEB may be slowed or interrupted if the patient develops any signs of infusion-associated events or other adverse events [see Warnings and Precautions (5.1) ] . Do not mix other medications with INMAZEB. Compatibility studies of INMAZEB have not been performed when co-administering other drugs simultaneously through the same infusion line.
7 DRUG INTERACTIONS Interaction with live vaccine indicated for prevention of Orthoebolavirus zairense infection: No vaccine interaction studies have been performed. INMAZEB may reduce the efficacy of the live vaccine. The interval between live vaccination following initiation of INMAZEB therapy should be in accordance with current vaccination guidelines. ( 7.1 ) 7.1 Vaccine Interactions No vaccine-therapeutic interaction studies have been performed in human subjects using INMAZEB. However, because of the potential for INMAZEB to inhibit replication of a live vaccine virus indicated for prevention of Orthoebolavirus zairense infection and possibly reduce the efficacy of the vaccine, avoid the concurrent administration of a live vaccine during treatment with INMAZEB. The interval between live vaccination following initiation of INMAZEB therapy should be in accordance with current vaccination guidelines. The efficacy of INMAZEB among subjects who reported receipt of a recombinant live vaccine prior to their enrollment in the PALM clinical trial was similar to subjects who did not receive a vaccine.
According to its FDA label, Inmazeb (atoltivimab, maftivimab, and odesivimab-ebgn) is approved for: 1 INDICATIONS AND USAGE INMAZEB is indicated for the treatment of infection caused by Orthoebolavirus zairense in adult and pediatric patients, including neonates born to a mother who is RT-PCR positive for Orthoebolavirus zairense infection [see Dosage and Administration (2.2) ,… For medical advice, please talk to your prescriber or pharmacist.
The FDA label lists Inmazeb (atoltivimab, maftivimab, and odesivimab-ebgn) as: 3 DOSAGE FORMS AND STRENGTHS INMAZEB is a clear to slightly opalescent and colorless to pale yellow solution available as: Injection: 241.7 mg of atoltivimab, 241.7 mg of maftivimab, and 241.7 mg of odesivimab per 14.5 mL (16.67 mg/16.67 mg/16.67 mg per mL) in a single-dose vial. Injection: 483.3 mg of atoltivimab, 483.3 mg of maftivimab, and 483.3 mg of odesivimab per 14.5 mL (33.33 mg/33.33 mg/33.33 mg per mL) in a single-dose vial. Injection: 241.7 mg of atoltivimab, 241.7 mg of maftivimab, and 241.7 mg of odesivimab per 14.5 mL (16.67 mg/16.67 mg/16.67 mg per mL) in a single-dose vial. ( 3 ) 483.3 mg of atoltivimab, 483.3 mg of maftivimab, and 483.3 mg of odesivimab per 14.5 mL (33.33 mg/33.33 mg/33.33 mg per mL) in a single-dose vial. ( 3 ); intravenous route. Available strengths and packaging vary by manufacturer.
Our ingest of the FDA label for Inmazeb (atoltivimab, maftivimab, and odesivimab-ebgn) does not include a Boxed Warning at this time. See the full label on DailyMed for the current, authoritative version.
Public CMS NADAC pricing for Inmazeb (atoltivimab, maftivimab, and odesivimab-ebgn) is in the range Retail prices vary widely by pharmacy, insurance, and location. Check with your pharmacy or use tools like GoodRx for current pricing.. Retail price varies by pharmacy, insurance, and manufacturer coupons.
The FDA Enforcement Report does not show an active/ongoing recall for Inmazeb (atoltivimab, maftivimab, and odesivimab-ebgn) in our latest ingest. Recall data can change daily — verify at FDA.gov.
The FDA record lists the approval date for Inmazeb (atoltivimab, maftivimab, and odesivimab-ebgn) as 2020-10-14.
The FDA label lists Regeneron Pharmaceuticals, Inc. as a labeler/manufacturer of Inmazeb (atoltivimab, maftivimab, and odesivimab-ebgn). Multiple firms may market generics of the same molecule.
The FDA label states: "Prior to dilution Store INMAZEB vial refrigerated at 2°C to 8°C (36°F to 46°F) in the original carton to protect from light. Do not freeze or shake." Follow the packaging insert for the authoritative guidance.
Loading full data from Know Your Drugs Institute…